V2000-c Rfid Access Control User Manual Jun 2026

: Press [*] + [Master Code] (Default: 12345 or 990101 ) + [#] . Exit Programming Mode : Press [*] . User Management RFID Programming Guide

| Action | Method | | :--- | :--- | | Open Door with Card | Swipe registered card near reader. | | Open Door with PIN | Enter [User PIN] + # . | | Open Door with Card + PIN | Swipe card, then enter PIN within 5 seconds. | | Exit Button | Press button (wired to BLUE/BROWN). | V2000-c Rfid Access Control User Manual

Supports WG26 for connecting external readers or controllers. www.goldbridgesz.com Programming Guide V2000-c Access Control Manual - Facebook : Press [*] + [Master Code] (Default: 12345

| Controller Terminal | Connects To | | :--- | :--- | | | Power adapter (12V DC) | | NO / COM | Electric lock (Normally Open) | | NC / COM | Electric lock (Normally Closed) | | PUSH | Exit button (momentary switch) | | D-IN | Door contact/magnetic sensor | | | Open Door with PIN | Enter [User PIN] + #

Check for a short circuit in the wiring or an "anti-tamper" alarm trigger.