Deckma Omd11 Manual 100%

Using the test filter or calibration kit is explained clearly. The zero and span checks are straightforward, and the manual reminds you to use clean air and calibration oil (e.g., Deckma calibration fluid or SAE 30 oil mist).

| Alarm Type | LCD Display | Likely Cause (per manual) | Action | | :--- | :--- | :--- | :--- | | | ALARM + High value | Real oil mist (piston blow-by, bearing hot spot) | Slow engine, investigate crankcase. | | Pre-Alarm | PRE-ALARM | Rising mist or sensor drift | Increase monitoring, check scavenge fires. | | Fault Alarm | FAULT + Code E-01 to E-12 | Electronic failure, no airflow, lens broken | Check blower motor, wiring, fuse F2. | | Low Flow | FLOW ERROR | Blocked sampling tube, blower impeller stuck | Blow out tube with compressed air (careful: 0.5 bar max). | deckma omd11 manual

: Available for viewing or download at Scribd - OMD-11 Instruction Manual and Yumpu - Instruction Manual Deckma Hamburg . Using the test filter or calibration kit is

: 0 to 30 ppm, with trend indication up to 50 ppm. | | Pre-Alarm | PRE-ALARM | Rising mist