The CEM Dual MIG 120 manual lists clear safety warnings. Ignoring them risks fire, electric shock, or eye damage.
Hold the wire tight so it doesn't unspool into a "bird's nest." 2. Feeding the Wire Release the tensioner arm on the drive motor. cem dual mig 120 manual
These are consumables. If the wire is "stuttering," replace the copper tip at the end of the torch. The CEM Dual MIG 120 manual lists clear safety warnings
Press the tension release lever on the drive roller. Insert the wire through the guide tube, over the appropriate drive roller groove (0.030” for most work), and into the torch liner. Close the tension arm—do not overtighten. Press the trigger until wire exits the tip. Feeding the Wire Release the tensioner arm on
: The most significant advantage is the ability to use two torches at once. This feature can significantly enhance productivity, especially in applications where two welders are needed to access a workpiece from different sides.
Based on standard MIG operating procedures for the 120 series: